Lost WiFI When Set Up RAZR Bluetooth

[wasatch]

I could use some thoughts on what to do get back on my home network.

I set up the TX with my Cingular Razr using WAP enabled GSM. I got this to work, but now when I try to get on my WiFI network at home I get the "Error: Serial timeout. Could be bad cable or faulty modem. (0.0305)." I get this no matter what I change in preferences to get on wifi - network etc.

And now it is doing more reset loops than ever before. Everything worked fine before on my Siemens s56 phone.

Any ideas?

Thanks,

[holvoetn]

Wifi and BT are running into the same frequency range so it is not that uncommon they get into conflict.

I could not directly find it again but I seem to recall having read over here you can not use both at the same time on a TX.
When you switch to Wifi, you need to disable BT.

Can you try that and let us know ?

[twy]

I have noticed on my TX that after I use a bluetooth DUN connection on my Motorola V3, the next time I try to use Wifi I get the same message. All I have to do is turn on the bluetooth and then the Wifi connection will work. After that initial problem, if I continue to connect via Wifi, bluetooth can then be turned off.

[wasatch]

Thanks much to both of you for responding.

Amazing, but when I turned off bluetooth nothing happened. Then I powered on and off. Then a reset loop started. Then everything worked! including getting my bottom status bar back that I lost when I installed a FITALY workaround. Amazing.


There is a god, and it loves the TX.

[rrfranczak3]

FYI: Wifi & Bluetooth can be used at the same time...............Rich