Closed Thread
Results 1 to 7 of 7
Thread: Best Case to Hotsync with Cradle
-
11-11-2005, 06:46 AM #1Mobile Enthusiast
- Join Date
- Jul 2003
- Posts
- 40
Best Case to Hotsync with Cradle
I have had my TX for two weeks now, with only a few unexpected soft resets as I load my old software back (III>IIIC>M515>T3>TX) and I just received the illuminated cradle/charger AFTER buying the Covertech black Aluminum Case. Aside from the case feeling pretty cheap, I can't hotsync in the cradle with the case on.
Anyone know which hard case will work with the Palm cradle? I assume most leather cases will work, but please advise if some don't, as I may change to leather.
Thanks.
-
11-19-2005, 06:05 PM #2El Guapo
- Join Date
- Sep 2005
- Posts
- 405
I too am searching for a case that I can use in the cradle. I'm not set on metal or plastic - just something that offers decent protection, has a spot for an extra SD card or two, and lets me sync without taking the T|X out of the case.
So far I pretty much hate every case I've seen for the T|X. I really liked the old leather pouch beltclip cases for the IIIx and Vx that Palm used to put out. Simple, and effective.
-
11-21-2005, 05:34 PM #3
Like this?
DT Lives in SFO...away from flying objects.
Psion 3, Palm Pilot, IIIxe, M130, TE, TE2, TX
Don't take yourself too darn seriously.
-
11-21-2005, 10:56 PM #4Mobile Enthusiast
- Join Date
- Jul 2003
- Posts
- 40
I thought of getting a more functional case than that one.
The Covertec would be good if it wasn't so flimsy feeling, a little thinner, and could sync in the cradle.
Leather is nice also, but I've had problems with EB cases pressing buttons inadvertently.
-
11-22-2005, 12:56 AM #5El Guapo
- Join Date
- Sep 2005
- Posts
- 405
Yes!Originally posted by Dick Tracy
Like this?
Now I just have to hope that it fits the TX well enough (the T|X sticks out of the top of the Vx case so much it won't close) and isn't too thick.
I'm using the magnetic-flap Palm Executive Case that I got on eBay for $5, but it's about twice as thick as it needs to be, and a little taller. It's just too bulky.
-
11-22-2005, 04:41 PM #6Mobile Consultant
- Join Date
- Apr 2002
- Posts
- 226
My understanding is that most leather cases don't allow charching with a cradle. One of the exceptions to this rule is the Sena case.
--
Press any key to continue or any other key to quit...
-
11-22-2005, 07:51 PM #7
Have you seen this case on the Palm Web Site?Originally posted by reverendjough
So far I pretty much hate every case I've seen for the T|X. I really liked the old leather pouch beltclip cases for the IIIx and Vx that Palm used to put out. Simple, and effective.Jim
Similar Threads
-
Screen hotsync OK, no cradle hotsync
By chermesh in forum General Palm OSReplies: 4Last Post: 09-16-2003, 09:56 AM -
TC case allowing HotSync in cradle?
By palmfan2002 in forum Tungsten CReplies: 1Last Post: 05-22-2003, 08:53 PM -
HotSync cradle
By sarivers in forum m100 seriesReplies: 2Last Post: 12-28-2002, 03:24 PM -
HotSync Cradle
By Glennsgirl in forum m100 seriesReplies: 4Last Post: 03-07-2002, 06:51 PM -
hotsync cradle
By alfredr in forum m100 seriesReplies: 1Last Post: 12-31-2001, 02:30 PM



LinkBack URL






Battery Life Sacrifice
Today, 01:58 AM in Smartphones